Regardless of where you live, temperatures drop in the fall and winter. It’s a good idea to make sure your furnace is up for the challenge of the cooler temperatures that are just around the corner. Performing an inspection will ensure you get the most out of your investment and that your family will be comfortable. There are things you can do and things that should be left to the professionals. Following is a checklist of tasks to perform before winter arrives.
Outdoor Furnace Tasks
Getting the outside tasks taken care of before the indoor tasks. Vegetation can block the airflow so clear it away. Your AC condenser well be protected from snow, sleet and other weather conditions if you cover it. You have no control over the weather, but you can control keeping the unit well protected from the elements.
Indoor Furnace Maintenance
Now you need to declutter the areas around the furnace inside. Make sure there is several feet of open space around the entire unit. Next, replace or clean the air filter. If the air filter is dirty it can impede air flow. This makes the furnace work harder. It puts strain on the unit and costs more in energy bills. The filter should be changed monthly. Make sure you’ve stocked up, so you have no excuse to keep putting it off. If you have a humidifier for the house, you’ll need to clean the water panel out. Check for mold and clean out any debris that you see. Furnace mishaps occur more in the colder months and the carbon monoxide detectors in your home can save your life. Change the batteries and test them.
Testing Furnace Heating System
Do not run the furnace until you’ve tested it. Testing it will make sure it’s functioning properly. Check the pilot light and turn the thermostat to 75 degrees. As you wait for it to kick on make sure all the registers are free of any obstructions. Check to make sure warm air is coming out of all of them. If not, there might be an issue with your system. You have a working furnace if you feel warm air coming out of all the registers, Score!
Furnace Heating Appliance Repair Services in Cedar Park, Austin, Round Rock, Plugerville, West Lake Hills, Manor, Sunset Valley, Bee Cave, Manchaca & Georgetown, Texas
Have the system inspected before it needs to be used. Professionals can check things that homeowners can’t. Small problems can be found before they turn into bigger problems. Professionals look at the ignition system, the burner assembly, the heat exchanger, the gas system and the combustion blower. They will check the air filter, the fan belt, the control box and the wiring for corrosion. The small price you’ll pay for an inspection will be well worth it in avoiding costly repair bills. Take the time to check your system so your family won’t be left in the cold. Once you get used to doing it, it will get easier and faster. Contact Texas Appliance Repair Service for repairs to any problems with your furnace.
